Bandwidth to Support Convergence
Convergence means combining or converging voice, data and video
onto a single network. Enterprises usually need to expand their
LAN bandwidth and set up a QoS or Quality of Service priority
system to give priority to real-time streams such as telephone
calls or video conference feeds, which are more sensitive to network
delays than data transfers. Most often, the common protocol for
convergence is IP.
How is PoE used for IP Phones?
PoE or Power over Ethernet is a standard that defines a way to
transmit electric power to network devices as well as information
packets. When PoE equipment is installed in equipment lockers,
an IP telephone gets its power from the network and does not need
a separate AC power supply.
What is PBT?
PBT stands for Provider Backbone Transport. It's an adaption of
Ethernet to extend Layer-2 switching into the WAN transport network.
PBT was pioneered by Nortel and will be standardized by the IEEE
How does Spanning Tree Protocol
STP or Spanning Tree Protocol is a technique used by Ethernet
switches to ensure that there is one and only one physical path
from source to destination. This is done to prevent forwarding
What is Mid-Band Ethernet?
Mid-Band Ethernet is a WAN or Wide Area Network technology that
delivers 2 to 45 Mbps over existing copper pair wiring. This bandwidth
range falls neatly in between T1 lines at 1.5 Mbps and DS3 service,
usually provided over fiber optic carriers, at 45 Mbps. As a native
Ethernet delivery system, mid-band Ethernet offers an easy way
to extend the corporate network beyond the premises.